Grundfos Redi-Flo 2 Pumps
$2,200.00 – $4,200.00
The Grundfos Redi-Flo 2/MP1 submersible pump is specifically designed for the purging and sampling of contaminated groundwater in boreholes of at least 2 inches in diameter. The pump is powered via a variable frequency drive operating in the 25 to 400Hz frequency range, allowing for a wide selection of flow rates.
- The pump must be powered using the VFD Controller (sold separately)
- Pump can be installed vertically or horizontally as long as the discharge port does not fall below the horizontal plane
- During operation, the pump must stay completely submerged to ensure the necessary lubrication of the shaft seal and cooling of the motor
- Can purchase with or without motor lead
- Not for use in flammable liquids
Contact one of our pump experts at 717-901-8891 for Redi-Flo 2 pump repair parts.
- Maximum total dynamic head is 275 ft.
- Powered by 110-115 V frequency converter
- Not suitable for PFOA/PFOS sampling
- Standard cable lengths of 100ft, 200 ft. or 300 ft. Custom lengths available.
- Must use pump shroud in borehole 3 in. or greater (sold separately)
