RKI Gas Tracer
$1,445.00
The Gas Tracer is excellent for testing and detection of small gas leaks.
Built around high-quality micro-sensor technology, the Gas Tracer is RKI’s smallest personal 5 sensor monitor with a built in sample pump.
It can monitor the standard gas safety hazards for gas/pipeline operations, (LEL combustibles, Oxygen content, and Carbon Monoxide), and it also has a high-sensitivity ppm CH4 leak tracker mode which reads down to 10 ppm. It can also measure 100% volume Methane and dynamically display either % LEL, or % volume with its auto-ranging ability.
- Monitors ppm, LEL, and % volume methane, O2 and CO
- PPM leak detector, detects down to 10 ppm CH4
- “Leak tracker” audible/visual alarm mode for CH4 and CO
- 0 to 100% volume Methane option
- Auto-ranging display of % LEL and % volume
- Barhole test mode
- Bump test reminder option
- Snap-logging – on demand data recording
- Pump pause on demand
- Internal sample drawing pump with up to 50 foot range
- Lithium ion or alkaline power battery packs (interchangeable)
- Up to 600 hours of datalogging with alarm trends
- Intrinsically safe, ATEX/IECEx/CE or c CSA us (Optional)
Gas Detected
- Combustible Gases (Methane as standard)
- Detection Principle: Catalytic combustion
- Detection Range: 0 ~ 100% LEL (1% LEL)
- Accuracy Statement: ± 5% of reading or ± 2% LEL (whichever is greater)
- Sampling Method: Internal sample pump, flow rate nominal 0.5 LPM, includes hydrophobic filter
- Preset Alarms (User Adjustable):
- 1st alarm: 10% LEL
- 2nd alarm: 50% LEL
- Over alarm: 100% LEL
- % Volume Methane
- Detection Principle: Thermal Conductivity
- Detection Range: 0 ~ 100% Vol.
- Accuracy Statement: ± 5% of reading or ± 2% of full scale
- Sampling Method: Internal sample pump, flow rate nominal 0.5 LPM, includes hydrophobic filter
- Preset Alarms: No alarms for % Vol. CH4
- PPM Methane
- Detection Principle: MOS/catalytic
- Detection Range: 0 ~ 5000 ppm optional 10,000 ppm range version available
- Accuracy Statement: ± 10% of reading or ± 50 ppm CH4
- Sampling Method: Internal sample pump, flow rate nominal 0.5 LPM, includes hydrophobic filter
- Preset Alarms: Increasing tone/light pulse as concentration increases
- Oxygen (O2)
- Detection Principle: Galvanic cell
- Detection Range: 0 ~ 40.0% Vol. (0.1%)
- Accuracy Statement: ± 0.5% O2
- Sampling Method: Internal sample pump, flow rate nominal 0.5 LPM, includes hydrophobic filter
- Preset Alarms:
- Low 1 alarm: 19.5% Low
- High alarm: 23.5%
- Over alarm: 40.0%
- Carbon Monoxide (CO)
- Detection Principle: Electrochemical cell
- Detection Range: 0 ~ 500 ppm (1 ppm)
- Accuracy Statement: ± 5% of reading or ± 5 ppm CO (whichever is greater)
- Sampling Method: Internal sample pump, flow rate nominal 0.5 LPM, includes hydrophobic filter
- Preset Alarms:
- 1st alarm: 25 ppm
- 2nd alarm: 50 ppm
- TWA alarm: 25 ppm
- STEL alarm: 200 ppm
- Over alarm: 500 ppm
General Specifications:
- Operating Temp. & Humidity: -4°F to 122°F (-20°C ~ +50°C); 0 to 95% RH, non-condensing
- Response Time: Within 30 seconds (T90)
- Continuous Operation:
- Alkaline battery: 15 hours, 70°F (21°C)
- Li-Ion battery: 10 hours, 70°F (21°C)
- Approvals: ATEX, TIIS, IECEx, CE, or optionally: c CSA us classified, as intrinsically safe. Class I, Division 1, Groups A,B, C, D
- Note: Either ATEX (USA and worldwide) or CSA (Canada) version must be specified when ordering.
- Controls: Five buttons – Power/Enter/Display, Air, Reset, Shift
- Standard Accessories: Belt clip, 10′ Probe, 10′ Hose, Rubber nozzle (2.5″), Manual, Training CD, Datalogging software, Quick reference card
- Optional Accessories:
- SDM-2012 calibration stations
- Calibration kit
- Li-Ion battery pack
- AC or DC charger
- Sample draw hoses (10′ standard, up to 50′ max. available)
- Configurations: 1, 2, 3, 4, or 5 sensor units and Li-Ion or alkaline battery pack options
- Warranty: 2 years material and workmanship
- Dimension: Approx. 5.6” H x 2.8” W x 1.6” D (143 (H) x 71 (W) x 43 (D) mm )
- Weight: Approx. 12.3 ounces (350 g)