Search results for: water pump
Proactive Stainless Steel Monsoon XL Pump
The Stainless Steel Monsoon XL pump is capable of pumping up to 120 feet from ground level (depth to water) by simply connecting the Stainless Steel Monsoon XL to the Low Flow with Power Booster 2 XL “LCD” Controller, then to a 12 volt deep cycle battery, energizing the pump.
Read MoreProactive Monsoon 12 Volt Plastic Pump
The Engineered Plastic 12-volt submersible centrifugal Monsoon pump is capable of pumping up to 120 feet from ground level (depth to water) by simply connecting the Monsoon to a 12-volt deep cycle battery. Its reliable design is perfect for continuous sampling and purging of groundwater wells.
Read MoreProactive Cyclone 12 Volt Plastic Pump
The Engineered Plastic 12 volt submersible centrifugal Cyclone pump is capable of pumping up to 25 feet from ground level (depth to water) by simply connecting the Cyclone to a 12 volt deep cycle battery.
Read MoreProactive Typhoon 12 Volt Plastic Pump
The Engineered Plastic 12 volt submersible centrifugal Typhoon pump is capable of pumping up to 50 feet from ground level (depth to water) by simply connecting the Typhoon to a 12 volt deep cycle battery.
Read MoreQED Sample Pro Bladder Pump Teflon® 1.75″ x 14.75″
The Sample Pro Pump is the first pump developed specifically to bring the advantages of low-flow sampling to site where groundwater sample are collected from many monitoring wells with the same pump. The Sample Pro Pump is easy to disassemble, without any tools, and simple to clean to eliminate any potential cross contamination.
Read MoreGrundfos Redi-Flo 2 Sampling Pump
The Grundfos Redi-Flo 2/MP1 submersible pump is specifically designed for the purging and sampling of contaminated groundwater in boreholes of at least 2 inches in diameter. The pump is powered via a variable frequency drive operating in the 25 to 400Hz frequency range, allowing for a wide selection of flow rates.
Available in 200, 250 and 300 foot lengths.
Read MoreGrundfos Redi-Flo 2 Pumps
The Grundfos Redi-Flo 2/MP1 submersible pump is specifically designed for the purging and sampling of contaminated groundwater in boreholes of at least 2 inches in diameter. The pump is powered via a variable frequency drive operating in the 25 to 400Hz frequency range, allowing for a wide selection of flow rates.
Read MoreSolinst Model 410 Peristaltic Pump
Designed for field use, the reversible flow Peristaltic Pump from Solinst is ideal for vapor sampling or water sampling from shallow wells and surface water.
(Order lead time may vary depending on manufacturer.)
Read MoreGrundfos 4in Environmental Pump Ends
Grundfos Redi-Flo 4 pump ends are ideal for sampling and operation in a remediation system. The Redi-Flo 4 differs from the standard Grundfos 4 in. pump end in that it replaces the standard rubber parts with virgin PTFE to handle the rigors of contaminated groundwater pumping.
Read MoreGrundfos SQE Pump
The Grundfos SQE Pump is a 3 inch submersible well pump with advanced electronic protection and soft start technology.
Grundfos SQE pumps are lightweight, dependable, and their advanced electronics offer protection from low voltage, over- and under-current, and dry-run (low water) events. These pumps are available in flow ranges from 5 to 30 gallons per minute.
Read More